Woodworking – Page 46 – Stochastic Geometry

Home / Tag "Woodworking" (Page 46)

Cleaning up and first pieces

So first thing this weekend was to clean up the shed. So obviously that meant building the cyclone dust collector 😀 I had tried this earlier:

And obviously it didn’t work well because it leaked vacuum all over the place. Maybe with some sealant around the lip of the bin it would have worked, but meh, it was a trial run anyway, the plan was always to get a barrel instead. That proved a little awkward, nowhere around here sells them, so ebay it was and the thing got shipped from Germany of all places. Cut the hole in the top, fitted the cyclone to that, cut down the hose a bit because it proved to be too long to maintain vacuum, and then fired it up and it worked!… Read the rest

Mark Dennehy in 13 Nov 2016 No Comments

Okay then…

Woodworking

…let’s see if he was right.

… Read the rest

Mark Dennehy in 13 Nov 2016 No Comments

Small jobs again…

Shed Sidecar Cot Woodworking

Workbench

Just not a very productive Sunday really. Checked my squares, found one is so not square that I threw away the crosspiece and I’ll use it as a straightedge from now on.

Then got on with building the jig. Laid out the geometry (a 10.3″ radius curve gives a 12″ radius curve and 15 degrees of springback).

Shop cat is somewhat critical of the layout…

Laminating MDF to make a drying form (which will have the 12″ radius and the walnut gets clamped to this for a week after it’s had a day or so on the bending jig to cool).

Lots of laminated MDF and 2×4 chunks. This is when you not only have insufficient clamps but also insufficient space to put the drying bits 😀

I thought it was a bit of a gimmicky thing when I bought it, but those silicone glue brushes work damn well.… Read the rest

Mark Dennehy in 06 Nov 2016 No Comments