Home / Tag "Woodworking" (Page 45)

Sapele

Woodworking

Last time I was at the timber yard, they gave me a small offcut of sapele to play with.
I now know this was that “first free one” famed in drug dealer PSAs…
img_9908a img_9911a

Just look at that grain!


 img_9907a
Also got to use the lidl chisels a bit after sharpening them. They came with flat backs along the first few inches in all bar the widest one and that only needed a minute or so of work; they take a nice edge and hold it reasonably well and they fit my hands fine. For less than a tenner, that’s a damn good bargain.… Read the rest

Read More
Mark Dennehy in No Comments

Bucket list

Sidecar CotWoodworking

Well, *I* think it’s listing a bit to the side. Might need another screw.

img_9875a

Still, it gets the pencils and marking knife and some smaller things up off the bench.

Finished prepping another 48″ length of walnut for the frame, but the waney edge on it meant it wasn’t useful as a 48″ length. So I guess it’s going to be one of the front legs and two feet of spare walnut. Oh well.

Then I figured it was high time to get some practice in for the joinery on account of having only cut joints in pine before now and having new tools to try.

img_9880a
img_9886a

Okay, all marked up for a half-inch tenon. This is the kind of joint we’ll have in the box section at the base of the frame, so large tenons would be a good thing and the shoulders don’t have to take very much strain at all, they’re mostly for alignment.… Read the rest

Read More
Mark Dennehy in No Comments

The marking on the wall

ShedSidecar CotWoodworking

Finished the assembly of the marking tools holder and got it up on the wall.

img_9868a

Well. Almost finished it. I need to attach a pencilholder type of tube for pencils and a shorter one for marking knives and awls and so on, and I’d like a seperate shelf with a large hole in it to hold the morticing gauge. But I want there to be space in there for any future gauges as well, so that’s okay. It gets the bench a bit cleaner and makes life a bit easier. Progress. Small steps.

img_9869a img_9870a img_9871a

It’s a bit of a step forward from only a few weeks back.

2016-09-27-20-47-06a

And after that, ripped down another 48″x2″ length of walnut and marked up for the next 48″ length, which I’ll finish ripping tomorrow, and try to get some crosscuts done to get more components ready, and maybe practice cutting an M&T joint in walnut.… Read the rest

Read More
Mark Dennehy in No Comments