Home / Tag "Woodworking" (Page 24)

Time to finish

FinishingSide TableTools
More
Woodworking

Small delay getting to the shed on Sunday.

Well. It’s a kind of woodwork.

Anyway, that evening, at around -3C in the evening. off to the shed. There were feet to shape.

I know, I know, Richard Maguire does it with a chisel. He also has enough room in his workshop to stand at either end of this bench. Anyway, the fretsaw was in need of exercise. So once the curve was cut, I used the spokeshave and a paring chisel to clean it up and cut a chamfer around the feet.

Dainty.

And they don’t rock, happily. And I’d put in a bullnose profile on the front sides using then #5 and #4 and a cabinet scraper.

Unfortunately, that meant it was time for the job I was putting off.… Read the rest

Read More
Mark Dennehy in 2 Comments

Standing upright

Side TableToolsWoodworking
More
Workbench

Last few days have been the first really cold ones of the year. -2C to -3C in the shed. And work was… somewhat excessive in the last few days so tonight was the first time in the shed in a few days and a to-do list was waiting. So…

Ran a slightly larger drillbit through the aprons to give some flex room for the bolts, and flattened the top of the aprons (I also spent a half-hour before this with the scrub plane and #5 flattening the underneath of the tabletop and hand-cutting the panel to width to trim out the worst of the bandsaw wobble).

The stainless steel inserts arrived on Thursday in the post, thankfully. Seems everyone makes these in zinc-plated steel, but actual stainless is a bit hard to find.… Read the rest

Read More
Mark Dennehy in No Comments

Resawing sucks.

Baby blanket chestWoodworking

Honestly, if there is a better argument out there for buying a large bandsaw I haven’t heard it yet.

Yes, I’ve heard of roubo frame saws. My shed hasn’t enough room between the face vice and the wall to use one.

Yes, I have western hand saws. I either need to resharpen them or recut their teeth because the best one I have didn’t want to cut.

Yes I have a bandsaw already – it can’t resaw anything over 75mm. That there is 115mm.

So, wax blade, yank handle, shove handle, repeat till ticked off enough to pull board halves apart by brute force, plane off worst of the gack in the middle with scrub plane, give outside a few passes to mitigate uneven drying, repeat.

What, you thought there was an art to this?… Read the rest

Read More
Mark Dennehy in 1 Comment