Home / Tag "poplar" (Page 9)

Mucking out and mucking about

Couple of days out of the shed, mostly spent lying down and paying attention to all the little muscle cells as they turned to me and said “what the feck was all that then?”. Today though was bin day so back out to the shed and spent a half-hour cleaning up all the shavings and using the shop vac to tackle the sawdust.

Before:

After:And then, having made a clean spot, went and tidied the small section behind the tumbledrier there where I usually wind up standing wishing I’d cleaned that part of the shed.

And then, having cleaned everything up, time to play…

First off, I did want to see what the stains look like and to try to replicate this:

Granted, I don’t have resawn squares of flamed sycamore, I’m mucking about with bits of poplar, but still…

That was a bit of fun.… Read the rest

Read More

Done…

Next year, we’re rescheduling christmas. End of discussion.

This year, Christmas Eve started with a quick run to woodies for small brass hinges. Then to the shed and…

Awkward planing setup needed to plane the outside of the carcass (the inside was planed before glue-up). I know it doesn’t look too awkward, but that’s because we need to zoom out a little and let you see where you’re standing when working…

The spot is that one there behind that small green case on the floor, between the bench and the tumbledrier but not past the leg of the bench because there’s a lot of small boards there that didn’t go in the main wood store. The joy of a small shed…

The downside is that you can’t really move when planing, so it’s all armwork rather than legwork.… Read the rest

Read More

Nyaaaarrrrrrggggghhhhh….

Seriously, who timed this christmas lark? It’s supposed to be January 6 for feck’s sakes…

Getting better at these. Only three of the four joints look like a blind boy scout attacked them with a dull beaver…

But they go together…

And the carcass is square. Grand. Only sixty more steps to go. Hide glue, btw. Set aside to cure for most of the day. then planed the face side so it was all in plane and with no twist. Then went to nail on the face frames and discovered I’d resawn them down to use as back boards. For feck’s sakes…

And no, it won’t work when the face frames are thinner than the door because then the hinges won’t work (and there’s not enough thickness to even attach them anyways)
I did find another poplar stick I can use, so it’s recoverable but I’m not loving when this happens.… Read the rest

Read More