Home / Tag "hand tools" (Page 8)

Starting to finish

Desk ShelfFinishingLocker
More
StringingWoodworking

So time to take the shelf out of the clamps and see if it’s okay…

holds breath…

That’s not too bad from the front 🙂
Different story from the back mind…

Urgh those dovetails. There will have to be some remediation work there. At least the white inlay bits worked reasonably well (you just can’t do dovetails from end to edge like that if there’s more than one tail, the short grain on the pin means it always breaks off, so I deliberately broke off the pins and replaced them with some sycamore chunks).

Okay. Time to start finishing. I could keep trying to touch this up for ages and never finish 🙁

Going for a simple finish this time, just some thin coats of osmo and buffing it out.… Read the rest

Read More
Mark Dennehy in 2 Comments

Glue-up part two

Desk ShelfLockerStringing
More
Woodworking

The resawn beech from yesterday is holding up well…

But never mind that, time to focus on the glueup from yesterday. It went reasonably well despite the fiddliness of the clamping.

They don’t look even from that angle, but they are:

There’s some squeeze-out and the join needed some fettling to get it properly smooth, and I suspect I’ll be running round the piece with a chisel checking arises before finishing, but it’s not too bad.

It’ll be interesting to see it with finish on. But today’s task is the final glue-up so I did a dry-fit and some inevitable tweaking and then did a dry rehearsal and then prepped to glue up:

The final glue-up was almost calm right up until the end when I realised I needed to clamp the dovetails as well and I had nothing on the front to clamp against and had to rig something using a third sash clamp and some heath robinson nonsense…

We’ll see how that went tomorrow…… Read the rest

Read More
Mark Dennehy in 2 Comments

Can you tell what it is yet?

LockerWoodworking

While wrapping up the stringing and preparing to glue and finish the latest project, I got some time to do the initial rough-cut of the pieces for the next project; which is to take the roughest thing that’s ever come out of the shed and remake it with a bit of refinement 😀

A quick hacking with the large ryoba broke these down to approximate length, and then some quick ripping with the bandsaw…

And that’s the rough stock almost ready. I want to see if I can resaw this (it’s some nice beech bought a while back in the timber yard, but I’ve not worked with this before and beech apparently has a reputation for movement). So I resawed one of the off-cuts and I’ll see how that moves over the next few days while I finish the stringing project.… Read the rest

Read More
Mark Dennehy in No Comments