Home / Tag "crib" (Page 6)

In the shed, nobody can hear you scream

Sidecar Cot

So, job one, get the end crossbars in place. Time to chop some mortices with damn near no margin for error at all…

The new mortices for the end panel are within a millimeter of the other mortices for the side panels. In one case, there’s an actual small breakthrough.

But it held and that’s one down. Then on to chopping mortices in the steambent upright, which is equally stressful because if you stuff it up, it’s a lot of repair work.

Awkward to chop too. There was a bit of spokeshave work before this, I figured do that before cutting holes in the thing…

The holdfasts really do make this a lot easier.

Then assembly and fettling…

Ah, feck. Can you see the problem?

Yeah, I’m going to have to rethink how the crossbar at the top attaches here.… Read the rest

Read More
Mark Dennehy in No Comments

Awkwardness

FinishingShedSidecar Cot
More
Woodworking

Back’s finally better enough to tackle the now ridiculous buildup of wood shavings in the shed…

Three bags full of the stuff in total, stuffed behind the bench, under the bench, all over the floor, in between the boards, everywhere. Of course, just because you get rid of the rubbish doesn’t mean that things stop being awkward…

Job one was to cut that plywood down to size so I could at least get into the shed again šŸ˜€ It’s to be the base for the drawer – I realised that the cedar of lebanon I had for that was not cedar of lebanon but western red cedar. Whoops. Oh well, better to find out now…

Then on to the front panel, which went quite quickly (so much faster doing this stuff with a template).… Read the rest

Read More
Mark Dennehy in No Comments

Getting technical

ShedSidecar CotWoodworking

So this:

is a shooting board (this one’s from Popular Woodworking, mine’s not as neat). Idea’s simple – for thinish boards (once you get up to an inch thick, you start just holding it in the vice and running a block or bench plane across it), you feed the board into the plane which is on its side and it will true up the endĀ so it’s exactly 90 degrees to both faces and edges. Which is handy for making things that don’t look like they were drawn by Escher while drunk. Problem is, most of my planes don’t have big sides – they’re the traditional bailey pattern and have rounded cheeks:

Which works, but it is a bit tippy. And the sidesĀ aren’t quite 90 degrees to the sole either, they’re a degree or so off.… Read the rest

Read More
Mark Dennehy in No Comments