Wires and panel

Desk ShelfShedWoodworking

So the walnut panel glueup went as well as I had hoped. The clamps did deform slightly – I need to do that trick of Paul Sellers and stuff them with wood – but the panel came together reasonably well.

There’s a step in the middle where one of the boards bowed though, of just over a mm, so there was some flattening to do before worrying about the surface much.

Ugly. Cross-grain planing required, so out with the #05…

At least it’s easy to see where I’m planing…

That proto-knot there in the back caused some issues with tearout that I’ll have to fix later. But the board is flat to the touch now and was smooth again after a few minutes with the #04 1/2

The chalk’s highlighting areas where even the cabinet scraper wasn’t handing the tear-out because actual lumps had been taken out during the cross-grain flattening.… Read the rest

Read More
Mark Dennehy in No Comments

First chips

Desk ShelfToolsWoodworking

So it’s a weekend afternoon so if there’s a more civil time to use a planer, it involves taking a day off work. So to the shed!

First up, fitted the DRO to the planer. Slightly fiddly, and it does still bind a little so I’m sure it needs tweaking – or I could just remember how this is for roughing work only and how it doesn’t matter all that much and never touch it again 😀

It’s within 0.1mm after a very quick calibration. That’s… rather impressive. Well past my abilities so maybe I really don’t need to do much to this. Have to be careful not to kick the DRO when the machine’s put away mind.

This looks to be where it’s living for now at least – that DRO’s a tad more exposed than I’d like, especially if I’m getting at the tools in the plastic boxes on the left, which is a regular sort of thing (I really could use drawers there but shigata ga nai).… Read the rest

Read More
Mark Dennehy in 3 Comments

Toys

ToolsWoodworking

Not done a tap in the shed in nearly two weeks now. Between work kicking up a notch and a short holiday away, not been near the place.

You might wish you were here, but it’s hard to know where “here” is…

 

On the way back, I did get to browse around The Carpentry Store for a few minutes, but alas they don’t carry Ashley Iles so I couldn’t try out those dovetail chisels. Mind you, I almost bought a few other things (but I was good…)

 

One day… when I have a bigger shed… it shall be mine…

 

And then there was the shiny shiny…

 

And I now finally understand why people go nuts for Stanley 51s…

This thing is awesome. For the price, it bloody well ought to be, but still.… Read the rest

Read More
Mark Dennehy in 4 Comments