Home / 2020 (Page 12)

Using up offcuts

Woodworking

So with the lockdown in Ireland now extended to May 5 – or The Lock-in as we ought to be calling it the way WW2 was The Emergency – garden centers are closed (apparently the Greens asking us to feed ourselves from our window boxes full of lettuce didn’t make Woodies an essential business 😀 ). I ran around one before the Lock-in commenced and got a lot of seeds and potting compost (and we already had a general-purpose liquid fertiliser and tomato feed and for high-nitrogen stuff like Basil, well everyone knows that trick of mixing eggshells and used coffee grounds with their compost, right?); but I thought we had more planters than we had. Seems I threw the ones we did have in the bin a few weeks ago because the UV had finally mangled them past maintenance’s hopes.… Read the rest

Read More
Mark Dennehy in 4 Comments

Planting mushrooms

WoodturningWoodworking

So the mushrooms turned from that branch from Fernhill were finished off; I cut the tenons off the two I turned in the chuck, drilled a mortice and glued in a piece of dowel:

And then Claire, Calum, Sonic and myself wandered up to Fernhill to plant them.

…and then I looted more wood.

Slightly larger this, but less circular. Not sure what I’ll make from it. More mushrooms I think, and maybe I can do a little birdbath…… Read the rest

Read More
Mark Dennehy in No Comments

First bowl!

WoodturningWoodworking

So the woodturning course I was taking was cancelled because of Covid19 before we got to the bowl turning part of the course. But I had a large variety sack of bowl blanks arrive from homeofwood.co.uk at the start of lockdown, and I’ve been wanting to try bowl turning for a while, so I read about a dozen books on bowlturning (like The Practical Woodturner and others), bingewatched about thirty hours of youtube intruction from a dozen different turners, set the pucker factor to maximum and picked out the smallest minature blank I had…

That’s a three-inch blank on a three-inch faceplate 😀 But we can still do more overkill…

Tailstock support on a three inch blank 😀 Well, first bowl, might as well do belt and braces. So I turned the tenon (and it didn’t look too bad I thought), then I took off the faceplate, chucked the blank up, realised I’d skipped a step, put the faceplate back on and turned the outside of the bowl.… Read the rest

Read More
Mark Dennehy in No Comments